From Architectured Materials to the Development of Large-scale Additive Manufacturing
Abstract
Architectured materials are a rising class of materials that bring new possibilities in terms of functional properties, filling the gaps and pushing the limits of Ashby’s materials performance maps [1]. Capitalizing on the concepts of architectured materials, explorations of the potential applications of large-scale 3D printing techniques to civil engineering structures were recently implemented in the DEMOCRITE project.
How to Cite
Dirrenberger, J. (2017). From Architectured Materials to the Development of Large-scale Additive Manufacturing. SPOOL, 4(1), 13–16. https://doi.org/10.7480/spool.2017.1.1910
Published
2017-12-24
Issue
Section
Articles
Categories
License
Copyright (c) 2020 SPOOL
This work is licensed under a Creative Commons Attribution 4.0 International License.
Plaudit
References
M. Ashby, Designing Architectured Materials, Scripta Materialia, vol. 68, no. 1, pp. 4-7, 2013.
M. F. Ashby and Y. Bréchet, Designing hybrid materials, Acta Materialia, vol. 51, pp. 5801-5821, 2003.
D. Embury and O. Bouaziz, Steel-Based Composites: Driving Forces and Classifications, Annual Review of Materials Research, vol. 40, pp. 213-241, 2010.
T. A. Schaedler, A. J. Jacobsen, A. Torrents, A. E. Sorensen, J. Lian, J. R. Greer, L. Valdevit and W. B. Carter, Ultralight Metallic Microlattices, Science, vol. 334, pp. 962-965, 2011.
P. Weaver and M. F. Ashby, The Optimal Selection of Material and Section-shape, Journal of Engineering Design, vol. 7, no. 2, pp. 129-150, 1996.
N. Auffray, J. Dirrenberger and G. Rosi, A complete description of bi-dimensional anisotropic strain-gradient elasticity, International Journal of Solids and Structures, vol. 69, pp. 195-210, 2015.
C. Gosselin, R. Duballet, P. Roux, N. Gaudillière, J. Dirrenberger ans P. Morel, Large-scale 3D printing of ultra-high performance concrete–a new processing route for architects and builders, Materials and Design, vol. 100, pp. 102-109, 2016.
XtreeE, http://www.xtreee.com
M. F. Ashby and Y. Bréchet, Designing hybrid materials, Acta Materialia, vol. 51, pp. 5801-5821, 2003.
D. Embury and O. Bouaziz, Steel-Based Composites: Driving Forces and Classifications, Annual Review of Materials Research, vol. 40, pp. 213-241, 2010.
T. A. Schaedler, A. J. Jacobsen, A. Torrents, A. E. Sorensen, J. Lian, J. R. Greer, L. Valdevit and W. B. Carter, Ultralight Metallic Microlattices, Science, vol. 334, pp. 962-965, 2011.
P. Weaver and M. F. Ashby, The Optimal Selection of Material and Section-shape, Journal of Engineering Design, vol. 7, no. 2, pp. 129-150, 1996.
N. Auffray, J. Dirrenberger and G. Rosi, A complete description of bi-dimensional anisotropic strain-gradient elasticity, International Journal of Solids and Structures, vol. 69, pp. 195-210, 2015.
C. Gosselin, R. Duballet, P. Roux, N. Gaudillière, J. Dirrenberger ans P. Morel, Large-scale 3D printing of ultra-high performance concrete–a new processing route for architects and builders, Materials and Design, vol. 100, pp. 102-109, 2016.
XtreeE, http://www.xtreee.com
